VALVESONLY EUROPE is the largest PLUG VALVE MANUFACTURERS IN ITALY. Plug valves are widely used in the process industry, these valves operate by rotation motion and are used to stop and start the fluid flow. A plug valve is shaped like a cylinder or cone and can be rotated inside the valve body to control flow of fluids. Plug valves have one or more hollow passageways often placed horizontally to allow ease of flow through the valve when open. The most common type of plug valve is the 2 port model with an open and closed position. The two ports are usually located on opposite sides of the valve with one passageway leading from inbound to outbound and the stem and handle located on the top. A plug valve also uses a quarter turn valve, which is useful where quick and frequent operation is essential. The valve ends can be flanged, hub type, or butt weld. Plug valve can be used in on-off, basic moderate throttling, and diverting services.


Plug Valve parts handle, stem, body, plug.
Industries which use Plug Valves:
• Chemical
• Oil & gas
• Petrochemical
• Food and beverage
• Technical gases
• Energy
• LNG & LPG

Types of Plug valves
• Lubricated plug valve
• Non-lubricated plug valve
• Eccentric plug valve
• Expanding plug valve
The advantages of Plug valves are
• Have simple design with few parts
• Open and close easily
• Provide reliable leak proofness
• Have low flow resistance

Body material: carbon steel, CF8M, WCB, CF8, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91], WCB, WC6, SS304, SS316, DUPLEX STEEL ,cast iron,cast steel
Class: 150-2500; PN 10 – PN 450
Size: 1/2”- 48”.
Operations: Lever actuated plug valve, electric actuated plug valve, pneumatic actuated plug valve, gear actuated plug valve
Ends: Flanged, butt weld, socket weld, threaded


Visit here for more details: https://www.valvesonlyeurope.com/product-category/plug-valve/



Milan, Industrial Machinery, Plug Valve Manufacturer