I bring strong experience in Fire Alarm Systems (FACP, MFACP, detectors), BMS/IBMS, CCTV, networking, public address systems, and LV/ELV services. Moreover, I am proficient in route design, load estimation, shop drawings, as-built documentation, procurement follow-up, subcontractor management, and coordination with consultants for inspections, MIRs, approvals, and technical submissions.
Finally, I have a strong track record of working with consultants and clients for MIRs, inspections, approvals, shop drawings, as-built documentation, and material submittal review. My work has consistently been recognized for professionalism, technical accuracy, and commitment to project success.
Organization: Tamimi Global Company KSA
Tenure: August 2023 - Present
Designation: Electrical Engineer
Project: NEOM Professional Accomodation Village 5040 Units Qayal. NEOM, Tabuk
Job Responsibilities
Project Planning & coordination
1-Review engineering plans, drawings, and specifications.
2-Provide technical support and guidance to team members.
3-Ensure compliance with relevant codes, standards, and regulations.
4-Assist with selecting and managing vendors/subcontractors.
5-Review technical submissions and vendor documentation.
6-Implement quality control procedures and standards.
7-Conduct inspections and tests to verify workmanship and materials.
8-Conducting daily project planning to guarantee the punctual and cost-effective completion of tasks, emphasizing
the prioritization of quality and continuous improvement.
9-Managing subcontractors and participating in invoice verification process (IPC).
Technical Oversight
1- Proficient in the installation of genertor, tranformer, switchgear, pss, smdbs and dbs.,mcc panel.
2-Experienced in the installation of bus bars, circuit breakers and safety panels for hvac systems.
3- Competent in wiring routing, design, estimation and load balancing.
4-Overseeing the implementation of Fire Alarm Systems (BPS, FACP, and MFACP), Integrated Building Management Systems (IBMS),CCTV systems and Public Address Systems, Networking and security items.
5-Successfully managed thoroughly project documentation, ensuring the timely submission of Inspection requests,MIRs, Rate Analysis and Quotations.
6- Preparation of shop and as-built drawings on AutoCAD in case of change in design.
7- Coordinate with the procurement department to ensure the timely delivery of approved materials.
8-Upheld adherence to safety protocols for protection.
Project Closure
1- Coordinate final inspections and acceptance procedures.
2- Ensure all documentation, as-builts, and manuals are handed over.
Testing and Commissioning
1- Testing & Commissioning of transformers, switchgear, power/control cables, DBs,earthing, fire alarm, IBMS, UPS and Battery bank ,Data center lighting, and security systems. FAT/SAT reports, calibration certificates.
Organization: Arabian Lions Company, Jeddah, KSA
Tenure: December, 2019 – July 2023
Designation: Electrical Engineer
Project: "Jeddah Sarfi Substaion NESMA/ SEC Substations 110Kv Additional Cables Installation Project,
NEOM Fiber Optics Backbone Project, STC NBB Projects Cabinest 726 Sakaka, Al Jouf Province
Al Nawariya STC FOC NBB Project, Makkah
National Guard FOC Project Near Jeddah Internation Aiport, Jedddah, Makkah "
Job Responsibilities:
1-Oversee and manage the installation of power and control cables, ensuring proper cable pulling techniques in trenches, ducts, and conduit systems.
2-Verify adherence to cable routing plans, bend radius limits, and segregation requirements for power and control cables.
3-Supervise the installation of earthing grids, equipment grounding, and bonding to meet electrical safety standards.
4-Ensure low-resistance grounding paths are established for effective fault current dissipation.
5-Manage and inspect the wiring of lighting circuits, power outlets, and other electrical loads according to single-line diagrams and control
schematics.
6-Ensure proper sizing, termination, and labeling of wires for both AC and DC systems.
7-Enforce HSE standards and best practices across all phases of project execution.
8-Conduct toolbox talks, hazard assessments, and ensure use of appropriate PPE and safe working procedures.
9-Supervise the installation of ATS systems for uninterrupted power transfer between utility and backup sources.
10-Prepare and maintain accurate as-built drawings, cable schedules, termination sheets, and test reports.
11-Ensure all documentation complies with client and regulatory standards.
12-Implement and monitor quality control procedures throughout installation and commissioning stages.
13-Participate in inspections, punch list resolution, and project closeout processes
Perform and document various electrical tests, including:
1-Insulation Resistance (IR) testing for cables and equipment.
2-Polarity Tests to confirm correct wiring of circuits.
3-Lux Level Testing to ensure lighting systems meet illumination standards.
4-Voltage Drop Analysis to validate efficient power delivery.
5-Load Testing to verify operational capacity and stability.
6-Participation in meetings with clients for progess and to resolve RFIs, iNCR, and NCRs issues
Organization: ISHAQ AKHONDI GENERAL CONTRACTORS AND SUPPLIERS, Islamabad, Pakistan
Tenure: May, 2014 – October, 2019.
Designation: Electrical Engineer
Projects Infra, Hospital and School Buildings Contruction