Project Engineer | Civil Engineer
Al Khobar / Dammam, Saudi Arabia | +966 566512498 | [email protected]
Nationality: Indian | Iqama Status: Transferable Valid Saudi Driving License | Languages: English, Hindi, Urdu
PROFESSIONAL SUMMARY
Industrial construction specialist with 6+ years executing civil, structural rehabilitation, and waterproofing projects for
Saudi Aramco, SABIC, and SEC across Saudi Arabia and India.
• Delivered projects at Jafurah Gas Plant, Ras Tanura Refinery, Ju'aymah, and RIYAS (Jubail)
• Certified Saudi Aramco Work Permit Receiver (WPR) | OSHA Construction Safety
• Expert in QA/QC coordination, PTW/HIRA/JSA compliance, and PMS-based project tracking
CORE COMPETENCIES
Project & Construction Management: Project Engineering · Civil Construction Management · Project Planning &
Scheduling · Project Management System (PMS) · BOQ Verification
Industrial & Safety Compliance: Saudi Aramco / SABIC / SEC Projects · Permit to Work (PTW) · HIRA & JSA · HSE
Compliance
Technical Execution: RCC Works · Waterproofing Systems · Structural Rehabilitation · Equipment Foundations · QA/QC
Inspection
PROFESSIONAL EXPERIENCE
Project Engineer (Civil & Waterproofing)
Arabian Building Support & Rehabilitation Company (ABSAR) | Eastern Province, Saudi Arabia | Aug 2024 – Present
Major Projects: Saudi Aramco – Jafurah Gas Plant, Ras Tanura Refinery & Gas Facilities, Ju'aymah Project, RIYAS Project
(Jubail); SABIC Industrial Plant – Jubail; Saudi Electricity Company (SEC) Projects
• Ensured on-time delivery of civil and structural rehabilitation works across 6+ major Saudi Aramco, SABIC, and SEC
industrial facilities, by supervising RCC works, equipment foundations, and waterproofing activities in full compliance
with Saudi Aramco Engineering Standards (SAES).
• Reduced inspection rework and approval delays by an estimated 15–20%, by reviewing method statements, drawings,
and material approvals prior to execution across concurrent sites.
• Improved project tracking accuracy and reporting turnaround, by implementing the Project Management System
(PMS) across 18+ concurrent sites for planning, progress monitoring, resource allocation, and Daily Progress Report
(DPR) preparation.
• Maintained 100% compliance with Permit to Work (PTW), HIRA, and JSA protocols across 10+ active job sites, by
coordinating daily with QA/QC, HSE, and subcontractor teams.
• Reduced waterproofing defect and rework rates by an estimated 10–15%, by managing execution of roof, basement,
and wet-area waterproofing systems, water tanks, expansion joints, crack injection, and protective coatings.
Civil Supervisor cum Work Permit Receiver (WPR)
Abdul Mohsen Al Horish Al Tamimi | Abqaiq, Saudi Arabia | Aug 2022 – Aug 2024
Client: Saudi Aramco – General Engineering Services (GES)
• Enabled zero safety incidents across 5000+ work permits issued over 2 years, by serving as authorized Saudi Aramco
Work Permit Receiver (WPR) and conducting pre-work hazard, isolation, and readiness inspections.
• Accelerated permit turnaround time by an estimated 20%, by coordinating directly with Aramco Operations,
Maintenance, Inspection, and Loss Prevention departments under PTW procedures.
• Delivered 10+ civil modification and structural repair projects on schedule, by supervising RCC works, foundations,
and excavation across GES scope — subsequently promoted into the Project Engineer role above.
• Improved subcontractor productivity by an estimated 15%, by coordinating manpower, equipment, and materials
across a 10–15-person crew against daily work targets and BOQ verification.
Full-Time Civil Engineering Studies
North East Christian University (NECU), India | India | 2018 – 2021
• Completed Bachelor of Civil Engineering following Diploma in Civil Engineering, building technical foundation in RCC
design, structural analysis, and construction methods prior to entering industrial project engineering roles in Saudi
Arabia.
Site Engineer
UME Construction Company | Delhi, India | Nov 2016 – Dec 2017
• Delivered institutional building construction on schedule and to specification, by supervising RCC, reinforcement
fixing, shuttering, masonry, and finishing works against approved structural drawings.
• Maintained quality control standards across 5+ work packages, by monitoring construction progress and coordinating
with contractors, consultants, and site teams.
PROFESSIONAL CERTIFICATIONS & TRAINING
• OSHA Construction Safety Certification Saudi Aramco Work Permit Receiver (WPR) · Project Management System
(PMS) Training
• 24-Hour Hazard Recognition Training · Permit to Work (PTW) System Training · HIRA ·JSA · Toolbox Talk & Safe Work
Practices
• Industrial HSE Awareness · Fire Prevention & Emergency Response · PPE Safety Training · Confined Space Safety
Awareness
• Working at Height Safety Awareness · Saudi Aramco Safety Orientation Training · SABIC Industrial Safety Training
TECHNICAL SKILLS
Engineering Software: AutoCAD (Certified)
Project Management: Project Planning & Scheduling · PMS · Progress Monitoring · Resource Allocation · BOQ Verification ·
DPR Preparation
Civil Engineering: Site Execution · RCC Construction · Waterproofing Systems · Structural Rehabilitation · Equipment
Foundations · QA/QC Inspection · Material Inspection · Quantity Verification · Surveying & Levelling · Drawing
Interpretation
Computer Skills: MS Excel · MS Word · PowerPoint · Outlook
EDUCATION
• Bachelor of Civil Engineering — North East Christian University (NECU), India (2018 – 2021)
• Diploma in Civil Engineering — Board of Technical Education, Rajasthan, India (2013 – 2015)
• Higher Secondary (Science – PCM) — RBSE, Ajmer, Rajasthan, India (2011 – 2013)