Profile:
As a Civil Site Engineer with 4+ years of experience in delivering structural and finishing works on Major Saudi projects. I bring a wealth of knowledge and expertise in reviewing construction drawings, construction execution, Project Coordination, Planning Activities (Actual vs Planned), Quality Control Review ITPs, MIRs, WIRs, RFIs, NCRs etc.), Extracting BOQ Quantities, and Billing Procedures (IPC, Measurement Sheet etc.), Coordinating with Consultants, Clients and Sub-Contractors. Knowledgeable in Saudi construction standards and International specifications, including ASTM, ACI, SBC, and AASHTO. I have experience in Pre Engineered Buildings (PEB) with expertise in supervising Erection of structural steel columns, beams, rafters (AISC 360), trusses, purlins, girts (AISI S100), and tensile membrane systems. Proficient in anchor bolt setting out, base plate grouting, high strength bolt torque/tension checks (ASTM F3125), and welding/NDT inspections.
I Specialized in Structural Projects i.e. The Avenues, Saudi Delta Fertilizers Factory.
Contractor: Nesma & Partners - Riyadh, KSA
Job & Key Responsibilities:
•Maintain and read updated approved drawings and supervise construction activities ensure that execution complies accordingly.
•Led and organized 80 subcontractor personnel into crews of 4 with dedicated team leaders, setting daily targets and tracking productivity, which improved output by 96%.
•Coordinate with procurement team and submit MRs by estimating material & reviewing BOQ, BBS, and Formwork for different components to ensure the availability of construction material i.e. steel, cement, sand, for ongoing activities with less delays and reduced 2.5-3% of wastage through inventory control.
•Monitor site activities according to approved drawings, project schedules, and construction instructions.
•Apply Quality Management Plan and check method statement ITPs, WIRs, MIRs for the activities to achieve targets as per quality standards.
•Ensured that work must be carried out as per construction specifications and standards i.e. ASTM, ACI, SEBC, and AASHTO.
•Coordinate with the QC department to process and submit Material Inspection Requests (MIRs) immediately after material delivery to site.
•Monitored pile foundation activities, including pile setting out and level verification (SAES A100), boring operations (SAES-Q-005), bentonite slurry preparation and application, temporary casing installation (SAES-Q-005), bore depth verification through chain measurement, reinforcement cage lowering to the specified cut off level (ACI 318), development and cut off length inspection, tremie concrete placement (SAES-Q-001), and removal of temporary casing in accordance with approved drawings and project specifications.
•Performed Pile inspection tests i.e. Integrated test (D5882), Dynamic load test (D4945).
•Coordinate with QC team and conduct Pre inspections of structural elements such as footing (ASTM A615), columns, beams, slabs as per (ACI 318, ACI 347R, ACI 117) which includes layout (SAES
A100), excavation (SAES A114), soil compaction (ASTM D1556), PCC casting (ACI 301), Formwork (ACI 347R) and reinforcement before client/consultant visits.
•Conduct concrete Pre pour inspections (SAIC-Q-1012), ensuring correct steel grades (as per drawing), bar spacing (as per drawing), angles (as per drawing), clear cover (75mm/50mm) lap lengths (ACI 318), Development length (ACI 318), Cutting Length (as per drawing).
•Supervise concrete casting for footings, columns, beams and slabs (ACI 301, ACI 304R) through vibration pumps to ensure proper compaction and prevent honeycombing. Conduct approximately 100+ Slump tests (ASTM C143) on site before concrete casting, Gather cube specimens for compressive strength (ASTM C39) water quality testing for PH checks and TDS for curing water must not exceed 1000 ppm (ACI 301-16).
•Supervise removal of formwork and monitor defects, Honeycombing, cracks and surface defects (ACI
308R).
•Prepare daily progress report (DPR) including Manpower state, Machinery state and Site Progress. Reported to Construction Manager and Project Manager.
•Coordinate with the Planning Engineer to monitor work progress i.e. Planned vs Achieved, Lead or Lag, Slippage risk, Follow Baseline Plans and Prepare Daily, Weekly and Monthly targets.
•Maintained Power BI dashboards for manpower, material, and progress reporting to project management
•Enforced HSE compliance through toolbox talks, permit to work systems, and site safety audits, sustaining a safe working environment throughout execution.
•Attend Minutes of Meeting (MOM), participated to resolve issues related project and to prepare reports i.e. Attendees, Apologies, Quality, Design and Documents, Procurement and Planning.
•Participated in Taking over Certificate (TOC) i.e. Annexures, Transmittal, References etc.
Contractor: Darat Contracting
•Supervise erection of structural steel and PEB components of 15,000 MT including columns, rafters, beams, trusses, purlins, girts, bracing and in line with approved drawings and the erection sequence (AISC 360, AISI S100, SBC 306).
•Verify anchor bolt positions (ASTM F3125), levels, and projections before column erection. Confirm base plate alignment and plumb, then approve grouting.
•Coordinate bolt torque and tension checks on high-strength bolted connections and record results for inspection.
•Interpret IFC, shop, and GA drawings to resolve site discrepancies and raise RFIs promptly.
•Verified fabrication documentation to confirm steel complied with project specifications and approved grades (i.e. EN 10025, minimum yield strength 355 N/mm²).
•Coordinate with the fabrication team, crane/rigging crews, and subcontractors to keep erection on schedule and deliveries aligned.
•Maintain QA/QC documentation (WIR, MIR, ITP, and NCR) and make sure inspection hold points are respected before work proceeds.
•Lead and supervise 35 site personnel, including erectors, riggers, welders, and foremen.
•Enforce HSE compliance during lifting operations and work at height, including PPE, permits, and toolbox talks.
•Represent the site team in consultant meetings and inspections, and manage snag list and handover.
•Submit daily and weekly progress reports to the Project Manager.
•Supervised installation and tensioning of structural cable systems and fittings according to the approved method statement and tensioning sequence.
•Coordinated tensile membrane installation, including lifting, positioning, stressing, and final alignment with the specialist supplier and engineering team.
•Monitored welding against approved WPS and coordinated NDT visual, UT, MPT and DPT.
•Inspected surface preparation (cleaning, grinding, blasting), galvanizing, coating thickness and painting system.
•Verified cutting, bending/forming, assembly, welding, coating and galvanizing work to approved standards (ASTM A123).
•Prepared and followed method statements covering transport, lifting plans, rigging, crane capacity and safety precautions (ASTM A780).
Email:
Atrás
Siguiente
- Posted by: [email protected]
- Member since: September 2026
- Posted:
- Categoría: Solicitantes de empleo
- Región: Yanbu (Riyadh, Jubail, Dammam, Khobar, Yanbu, Abha, Makka)
- ID de publicación: 64708596