ABDUS SALAM
CONCRETE LABORATORY TECHNICIAN QC / MATERIALS TESTING DRIVER
Saudi Arabia Mobile: 0593530349 Email: abdussalamkhan9445656@gmail ...

PROFESSIONAL SUMMARY
Concrete Laboratory Technician with 4 years of experience at Ready Mix Beton LLC, Dubai, UAE, supporting ready-mix concrete laboratory and site
operations, fresh concrete testing, quality procedures and concrete-pouring coordination. Also has 2 years of Quantity Surveying experience. Familiar
with concrete, aggregate, soil, cement and bitumen laboratory testing methods. Holds a Concrete Field Technician Performance Certification from
Grey Matters Training Services. Driving licence available. Seeking opportunities in Saudi Arabia as a Concrete Laboratory Technician, Materials / QC
Technician or Driver.
CORE SKILLS
• Fresh and hardened concrete testing; concrete sampling, slump, temperature and workability checks

• Concrete cube / cylinder specimen preparation, curing, compressive strength testing and result recording

• Aggregate sampling, sieve analysis, grading / gradation, moisture content, specific gravity and water absorption

• Soil sampling and testing, including sieve analysis, moisture content, Atterberg limits and compaction concepts

• Cement testing knowledge: fineness, standard consistency, setting time, soundness and strength

• Bitumen testing knowledge: penetration, softening point, ductility, flash / fire point and specific gravity

• Laboratory equipment handling, test documentation, quality records and site coordination

• Ready-mix concrete pouring coordination, transit mixer access checks and volume estimation

• Quantity surveying support; Microsoft Word, Microsoft Excel and internet use

• Driving, safe driving practices and vehicle / route awareness

LABORATORY TESTING KNOWLEDGE
Concrete: slump test, concrete temperature, fresh-concrete sampling, workability checks, air-content test (where required), unit weight / density, cube and
cylinder casting, specimen identification, curing, compressive strength test and test-result reporting.
Aggregates: sieve analysis and grading, particle-size distribution, moisture content, specific gravity, water absorption, bulk density, and flakiness / elongation
index (where applicable).
Soil: moisture content, sieve analysis, particle-size distribution, Atterberg limits (liquid and plastic limits), Proctor compaction, field density and CBR (where
applicable).
Cement: fineness, standard consistency, initial / final setting time, soundness and compressive strength of cement mortar.
Bitumen: penetration, softening point, ductility, flash / fire point, viscosity and specific gravity.

PROFESSIONAL EXPERIENCE
Laboratory Technician (Civil) 4 Years
Ready Mix Beton LLC, Dubai, United Arab Emirates
• Worked as a laboratory technician and supported concrete-related site coordination.

• Monitored and coordinated with the plant during concrete-pouring schedules.

• Assisted in implementing company quality procedures at project sites.

• Helped resolve technical issues before, during and after concrete pouring.

• Estimated required concrete volumes and checked site / road accessibility for transit mixer trucks.

• Performed fresh concrete testing and supported laboratory / field quality activities.
Quantity Surveyor 2 Years
Employer details not provided
• Has 2 years of quantity surveying experience.

DRIVING LICENCE
Driving Licence: Available. Saudi Arabia driving licence, UAE Category B driving licence and Pakistani driving licence (as previously provided).
Driving experience includes approximately 4 years in the UAE and 8 years in Pakistan. Open to suitable Driver positions.
EDUCATION
• Bachelor of Arts (B.A.) — Board of KPK, Pakistan

• SSC / Matriculation — Science — Board of Swat, Pakistan

• Quantity Surveyor Diploma

CERTIFICATION
• Concrete Field Technician Performance Certification — Grey Matters Training Services.

LANGUAGES & ADDITIONAL INFORMATION
Languages: Sindhi, Urdu, Punjabi, English and Arabic.
Computer: Microsoft Word, Microsoft Excel and internet browsing.
Target roles: Concrete Laboratory Technician, Concrete QC Technician, Materials Technician, Field Concrete Technician and Driver.




Abdus Salam Professional CV Page 1

--- CV ---
ABDUS SALAM
CONCRETE LABORATORY TECHNICIAN QC / MATERIALS TESTING DRIVER
Saudi Arabia Mobile: 0593530349 Email: abdussalamkhan9445656@gmail ...

PROFESSIONAL SUMMARY
Concrete Laboratory Technician with 4 years of experience at Ready Mix Beton LLC, Dubai, UAE, supporting ready-mix concrete laboratory and site
operations, fresh concrete testing, quality procedures and concrete-pouring coordination. Also has 2 years of Quantity Surveying experience. Familiar
with concrete, aggregate, soil, cement and bitumen laboratory testing methods. Holds a Concrete Field Technician Performance Certification from
Grey Matters Training Services. Driving licence available. Seeking opportunities in Saudi Arabia as a Concrete Laboratory Technician, Materials / QC
Technician or Driver.
CORE SKILLS
• Fresh and hardened concrete testing; concrete sampling, slump, temperature and workability checks

• Concrete cube / cylinder specimen preparation, curing, compressive strength testing and result recording

• Aggregate sampling, sieve analysis, grading / gradation, moisture content, specific gravity and water absorption

• Soil sampling and testing, including sieve analysis, moisture content, Atterberg limits and compaction concepts

• Cement testing knowledge: fineness, standard consistency, setting time, soundness and strength

• Bitumen testing knowledge: penetration, softening point, ductility, flash / fire point and specific gravity

• Laboratory equipment handling, test documentation, quality records and site coordination

• Ready-mix concrete pouring coordination, transit mixer access checks and volume estimation

• Quantity surveying support; Microsoft Word, Microsoft Excel and internet use

• Driving, safe driving practices and vehicle / route awareness

LABORATORY TESTING KNOWLEDGE
Concrete: slump test, concrete temperature, fresh-concrete sampling, workability checks, air-content test (where required), unit weight / density, cube and
cylinder casting, specimen identification, curing, compressive strength test and test-result reporting.
Aggregates: sieve analysis and grading, particle-size distribution, moisture c
Voltar Próximo